[SI-LIST] Re: Pspice 6.0 can't find it's security dongle

PSRumbaugh,

     I had the same problem when trying to connect my ham radio
     equipment to a USB-RS232 adapter. The solution is to use
     a PCMCIA-RS232 adapter instead. PCMCIA adapters can be
     purchased online, new for $70 to $100 USD.


  http://www.google.com/search?hl=en&q=rs232+pcmcia


     If you can wait a week or two, they can also be purchased
     from ebay for under $20 USD.

     
http://search.ebay.com/search/search.dllfrom=R40&_trksid=m37&satitle=rs232+pcmcia&category0=


Regards,
       Mike Finczak
       CopperCAD Design
       www.CopperCAD.com
       905-488-8958

> I have the electronic circuit analysis program Pspice V6.0 that I am
> trying
> to run on my Compaq Presario V2000 laptop that runs on WinXP.  The
> analysis
> engine of Pspice V6.0 appears to be DOS based and needs a security dongle
> attached to the RS-232 port.  The laptop, that does not have a built in
> serial
> port (RS-232), uses a Radio Shack #26-183 USB to RS-232 adapter.   Pspice
> can
> not find itâ??s valid security dongle that is attached to the RS-232
> adapter,
> which keeps the program from running.  I am using two DOS  augmentation
> programs,
> TameDos V5.0 and Direct I/O V4.4.  Any suggestions  on how to help Pspice
> V6.0 find itâ??s valid, registered security dongle would be  appreciated.
>
>
> ************************************** See what's new at
> http://www.aol.com
>
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
> or to administer your membership from a web page, go to:
> http://www.freelists.org/webpage/si-list
>
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
>
> List technical documents are available at:
>                 http://www.si-list.net
>
> List archives are viewable at:
>               http://www.freelists.org/archives/si-list
> or at our remote archives:
>               http://groups.yahoo.com/group/si-list/messages
> Old (prior to June 6, 2001) list archives are viewable at:
>               http://www.qsl.net/wb6tpu
>
>
>

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List technical documents are available at:
                http://www.si-list.net

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: