[SI-LIST] Pspice 6.0 can't find it's security dongle

I have the electronic circuit analysis program Pspice V6.0 that I am trying  
to run on my Compaq Presario V2000 laptop that runs on WinXP.  The analysis  
engine of Pspice V6.0 appears to be DOS based and needs a security dongle  
attached to the RS-232 port.  The laptop, that does not have a built in  serial 
port (RS-232), uses a Radio Shack #26-183 USB to RS-232 adapter.   Pspice can 
not find itâ??s valid security dongle that is attached to the RS-232  adapter, 
which keeps the program from running.  I am using two DOS  augmentation 
programs, 
TameDos V5.0 and Direct I/O V4.4.  Any suggestions  on how to help Pspice 
V6.0 find itâ??s valid, registered security dongle would be  appreciated. 


************************************** See what's new at http://www.aol.com

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List technical documents are available at:
                http://www.si-list.net

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: