[SI-LIST] Pros/Cons of Agilent vs Tek scope for DDR2/DDR3 characterization

Need to make a selection of which scope to buy for DDR2/3 i/f JEDEC compliance 
testing on the memory controller(s). I personally like Tek scope but it is more 
expensive and its DDR  compliance test software doesn't support all the 
required parameters.
Did anybody evaluate both scopes for this application and which one you picked? 
What were pros/cons to go with Tek vs Agilent or vice versa?

Thanks in advance

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List technical documents are available at:
                http://www.si-list.net

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: