[SI-LIST] Re: Problem with HFSS 9

  • From: "Ming Tsai" <ming.tsai@xxxxxxxxxx>
  • To: <kundanchand@xxxxxxxxx>, <si-list@xxxxxxxxxxxxx>
  • Date: Mon, 17 Oct 2005 10:08:00 -0700

Hi Chand,

Usually for smooth transition, I will use interpolation sweep. Fast
sweep is preferred in highly or multiple resonances cases. Of course,
you can always to run discrete analysis to verify.

Ming
--
Ming J. Tsai, Ph.D.
Staff Hardware Development Engineer
Product Technology - Hardware Design Group XILINX
Telephone: 408-626-6260
E-Mail: ming.tsai@xxxxxxxxxx



-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx]
On Behalf Of kundanchand chand
Sent: Saturday, October 15, 2005 10:44 AM
To: si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] Problem with HFSS 9

Hi everyone

=20

I am trying to get impedance plots for a power bus board using HFSS 9. I
performed simulations on the same geometry using the following 2
frequency ranges:

=20

1) start =3D 1 MHz, stop =3D 200 MHz, step =3D 1 MHz

2) start =3D 1 MHz, stop =3D 1 GHz, step =3D 1 MHz

=20

But the impedance plots (1 MHz - 200 MHz) are different for both cases.=20

=20

Can anyone let me know the reason for that. I am using "fast" frequency
sweep.

=20

Thanks

        =09
---------------------------------
 Yahoo! India Matrimony: Find your partner online.

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:    =20
                //www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
 =20



------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                //www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  

Other related posts: