Hello All, In my current board design I have the following stack up: ....... ---------------- GND (solid plane) ------ ----- --- VCC1 (splitted plane) --- ----- ------ VCC2 (splitted plane) ---------------- GND (solid plane) ....... 4 mils separate GND and VCC planes 5 mils separate VCC1 and VCC2 planes Both VCC planes are splitted in different power domains and I am wondering : - if having two coupled VCC planes is good/acceptable when thinking about noise ?? - if there is a problem in having one power domain on on plane overlapping at least two power domains on the other plane ?? Thanks Ludovic Levieil ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu