[SI-LIST] PSpice to HSpice

Hi all,
I have a netlist in Pspice that i have converted to an HSpice format.
The Pspice netlist uses the Vswitch option which is not available in 
Hspice.

I have modeled the Vswitch as a voltage controlled resistor (VCR) in 
Hspice using the G element. 

Pspice simulation shows hardly any overshoot or undershoot while the 
Hspice simulation shows a lot of overshoot and undershoot.

The only change apart from syntax in both cases is the Vswitch option.

Can anyone suggest if what i am doing is right or is there is a better way 
of doing this?

Thanks
Nikhil

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: