[SI-LIST] Re: PLL Jitter measurement
- From: "Istvan NOVAK" <istvan.novak@xxxxxxxxxxxxxxxx>
- To: <anil.goyal@xxxxxx>, "si-list" <si-list@xxxxxxxxxxxxx>
- Date: Wed, 29 Dec 2004 19:50:23 -0500
Anil,
It is hard to answer your question in general, because all
of these instruments work with slightly different hardware
and software, so you may not find any other instrument
which performs exactly as the Wavecrest SIA3000.
Time Interval Analyzers, real-time scopes, undersampling
scopes (also called equivalent time scopes), Bit Error Rate
testers all can give you information on jitter. If you need to
measure only reference clocks, which is usually below a
few hundred MHz in frequency, you can also consider a
software postprocessing solution offered by Amherst Systems
Associates. If you need to measure Gbps signals as well,
you need to check the available scopes from LeCroy,
Tektronix, Agilent and see how the triggering, memory
depth, complience-test features line up with your requirements.
Regards,
Istvan Novak
SUN Microsystems
----- Original Message -----
From: "Anil Kumar GOYAL" <anil.goyal@xxxxxx>
To: "si-list" <si-list@xxxxxxxxxxxxx>
Sent: Wednesday, December 29, 2004 7:05 AM
Subject: [SI-LIST] PLL Jitter measurement
> Hello All,
>
> Currently for PLL jitter measurement, i am using SIA3000 wavecrest but
> due to some problem, we want to have some oscilloscope for measuring the
> timing jitter of the PLL. So could you please let me know which Scope
> can measure all kinds of jitter ( Period variation, cy-to-cy, skew, self
> referred accumulated jitter etc. etc. ) with the same accuracy as the
> SIA3000.
>
> Thanks for your help.
> Anil
>
>
>
>
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
> or to administer your membership from a web page, go to:
> http://www.freelists.org/webpage/si-list
>
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
> List FAQ wiki page is located at:
> http://si-list.org/wiki/wiki.pl?Si-List_FAQ
>
> List technical documents are available at:
> http://www.si-list.org
>
> List archives are viewable at:
> http://www.freelists.org/archives/si-list
> or at our remote archives:
> http://groups.yahoo.com/group/si-list/messages
> Old (prior to June 6, 2001) list archives are viewable at:
> http://www.qsl.net/wb6tpu
>
>
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
- References:
- [SI-LIST] Re: Series termination
- From: Vinayak AGRAWAL
- [SI-LIST] Re: Article discussion on bad packages
- From: Aubrey_Sparkman
- [SI-LIST] Re: Article discussion on bad packages
- From: steve weir
- [SI-LIST] Series termination
- From: Vinayak AGRAWAL
- [SI-LIST] Re: Series termination
- From: steve weir
- [SI-LIST] PLL Jitter measurement
- From: Anil Kumar GOYAL
Other related posts:
- » [SI-LIST] PLL Jitter measurement
- » [SI-LIST] Re: PLL Jitter measurement
- [SI-LIST] Re: Series termination
- From: Vinayak AGRAWAL
- [SI-LIST] Re: Article discussion on bad packages
- From: Aubrey_Sparkman
- [SI-LIST] Re: Article discussion on bad packages
- From: steve weir
- [SI-LIST] Series termination
- From: Vinayak AGRAWAL
- [SI-LIST] Re: Series termination
- From: steve weir
- [SI-LIST] PLL Jitter measurement
- From: Anil Kumar GOYAL