[SI-LIST] Re: PECL lines

Edi, the signals have to cross within the receiver common mode range.

Steve.
At 08:01 AM 2/24/2004 +0200, Fraiman Edi-BEF012 wrote:

>         Hi All,
>
>         I am designing fiber channel board.
>         Two differential high speed PECL (Positive Emitter Coupled Logic) 
> lines should be connected from SERDES chip to SFP (Small Form-Factor 
> Pluggable        Transceivers).
>         I don't understand what the max. difference length between two 
> lines should be?
>
>         Thank You
>         Edi
>
>
>
>
>
>
>
>
>------------------------------------------------------------------
>To unsubscribe from si-list:
>si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
>or to administer your membership from a web page, go to:
>http://www.freelists.org/webpage/si-list
>
>For help:
>si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
>List technical documents are available at:
>                 http://www.si-list.org
>
>List archives are viewable at:
>                 http://www.freelists.org/archives/si-list
>or at our remote archives:
>                 http://groups.yahoo.com/group/si-list/messages
>Old (prior to June 6, 2001) list archives are viewable at:
>                 http://www.qsl.net/wb6tpu
>


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: