[SI-LIST] PCI-X 1.0a simulation

Hi all,

In my circuit there are two devices PCI-X 1.0a driver and receiver.
I have IBIS model for receiver.
I don't have IBIS model for driver.

Can I use any generic PCI model for my driver?
Anyone has faced condition like this?

Thanks in Advance.....

--
Regards
Naren

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  

Other related posts: