[SI-LIST] PCI input setup time question

Hi all,

What is the correct voltage level for bussed signals when measuring =
input setup time in a PCI bus?
I have used either 0.5Vcc or 0.3Vcc (rising/falling) to be sure that the =
data is valid.
There is also 0.4Vcc (V_test) in the spec 4.2.3.3 Measurement and Test =
Conditions but the data isn't valid at that voltage level yet :-)

        -Marko

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: