[SI-LIST] PCB size Vs thickness

HI all,

I need some guidence on deciding PCB thickness for 18" X 12"
board.

Since there is not much requirements on No.of routing layers & power
layers, i am more considerable to the mechanical aspects of the board
(like warpage,aspect ratio,etc.,).

can some point me the recommended pcb thickness for proposed pcb size
or vice versa? Where can i get those information?

Thanks,
-D.RAJASEKAR

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: