[SI-LIST] Re: PCB Trace Antenna

Boopathy,

Not knowing the RF system parameters you have 
to achieve, just based on the stated frequency, 
you probably want to create a tuned loop antenna.  
In this case the trace impedance matters less, 
in fact you may want to increase it as much 
as possible. More will matter the size 
(and orientation) of loop and the number of turns.


regards,

Istvan novak
SUN Microsystems

Boopathy J. wrote:

>Content-Type: text/plain;
>       charset="us-ascii"
>Content-Transfer-Encoding: quoted-printable
>HI,
>
> We are designing HF card Reader  at f =3D 13.56MHZ.
>
>we need to implement the Antenna In PCB  traces. As I haven't worked =
>much on
>
>RF PCB design, I would like to know how to implement it &
>
>how to determine the Trace length & impudence for 13.56MHz.
>
>=20
>
>=20
>
>Thanks In advance
>
>=20
>
>Regards,
>
>Boopathy J
>
>=20
>
>
>
>  
>

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: