[SI-LIST] Re: OUTPUT IMPEDANCE CALCULATION [IBIS]

Carlos

Ohms law (Z= V/I).  You have a V/I curve at min/typ/max device corners.


regards,

Scott

Scott McMorrow
Teraspeed Consulting Group LLC
121 North River Drive
Narragansett, RI 02882
(401) 284-1827 Business
(401) 284-1840 Fax

http://www.teraspeed.com

Teraspeed® is the registered service mark of
Teraspeed Consulting Group LLC



Carlos Toro wrote:
> Hello members of the SI list.
> Does anyone has experience with calculating the output impedance of a
> microcontroller
> pin given its IBIS model?.
>
> I don't have access to the silicon yet, just the IBIS for now. I intend to
> match impedances
> of critical PCB traces of our design.
>
> Thanks in advance.
>
>
>   
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: