Hi everyone I have to design a (low power) "power splitter" to split a 1.2 GHz signal to 15 outputs. I thought to use a 16 port splitter and to load the not used output. BUT the splitter is going to be used to collect signals from the 15 inputs and the S/N ratio would be degraded by the load. Do you know any architecture which solves this problem? i.e. to split to a odd number of outputs. All I've seen is for an even number of outputs. The bandwidth Df/f0 is 4% Do Have a nice weekend Julio ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu