[SI-LIST] Re: Mounting pad Design??
- From: Riaz Sobrany <r.sobrany@xxxxxxxxxxxxxxxx>
- To: Kevin Buchanan <buck@xxxxxxx>
- Date: Tue, 24 Aug 2004 17:58:44 +0100 (BST)
On Tue, 24 Aug 2004, Kevin Buchanan wrote:
> Hello All:
>
> I'm a student at UMass and am looking for a source
> of info to find out how to determine the impedance
> of a footprint pad.
>
> What I'm looking for is pointers to reference material or
> paper(s) on launch design.
>
> I would like to do some reading on the subject
> particularly as it applies to connector footprints.
If you are referring to probe pads then there are two fairly recent
articles in Microwave Journal and IEEE Trans. MTT written by Scott
Wartenberg.
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
