Hi, I'm working a design that has a 33MHz PCI bus. There are five PCI devices including the processor on this PCI bus. In addition, I also have two Mictor connectors on this bus. The PCI devices are daisy-chain connected. The question I have is where should I place the two Mictor connectors on the PCB? at the end of the bus? in the middle of the bus? or does it matter? Thank you for your help. Regards, Kevin __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu