[SI-LIST] Re: Message submitted to 'si-list'


Nancy-

All you need to do is place a large (say 10 Megohm or 100 Megohm)
resistor from node 3 to ground (node 0). This will make Hspice happy
by creating a DC path and not effect the results of your simulation.

I _think_ there is some option you can specify in Hspice to make this
happen automatically, but don't have the details handy at the moment.

-Ray

> 
> SI-list,
> 
> I am using Star-HSPICE to simulate a very simple circuit, but I got an error 
> message "no dc path to ground from node    0:3 ". Can HPICE simulate this 
> kind of circuit? How can I fix the error? Thanks.
> 
> -----------------circuit script ------------------
> .option post = 2
> .ac lin 100 1e6hz 5ghz
> vs 1 0 ac 1
> rs 2 1 50
> c1 3 2 1e-12
> c2 3 0 2e-12
> .print ac vm(3)
> .end
> ---------------------------------------------------
> **error**:  no dc path to ground from node    0:3
> 
> Nancy
> 

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: