[SI-LIST] Re: Measuring Power supply Ripple and Noise

> Both TEK and Agilent offer 10:1 passive probes.  I far prefer to use
> these probes when possible rather than soldering up coax.  ...

It took me a while to appreciate the simplicity of coax and solder.

For $10, you can get a 6 ft chunk of coax with molded BNC connectors.  Cut it 
in half and you have two coax probes.  Remove a bypass cap and you have a 
good place to solder it to.




-- 
These are my opinions, not necessarily my employer's.  I hate spam.



------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List technical documents are available at:
                http://www.si-list.net

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: