[SI-LIST] Re: Maximum Current Density for Copper Plane

In the question asked below, the copper thickness is 1.3 mils.
Regards,
Avtaar


On 8/13/08, Avtaar Singh <avtaarenator@xxxxxxxxx> wrote:
>
> Gurus:
>
> Can you kindly let me know the maximum current density that a copper plane
> can handle?
>
> Can anyone forward to me a detailed guideline on how to decide on amount of
> copper to use in a stackup, given the amount of current that needs to flow
> through the plane?
>
> Regards,
> Avtaar
>


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List technical documents are available at:
                http://www.si-list.net

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: