[SI-LIST] MICROVIA CAPACITANCE
- From: "Juan Manuel" <jtalavera@xxxxxx>
- To: "si list" <si-list@xxxxxxxxxxxxx>
- Date: Tue, 26 Nov 2002 15:09:56 -0000
Hello everybody,
does someone know the typical values (range) of the parasitic capacitance of
a microvia?
Thank in advice.
-------------------Legal Disclaimer---------------------------------------
The above electronic mail transmission is confidential and intended only for
the person to whom it is addressed. Its contents may be protected by legal
and/or professional privilege. Should it be received by you in error please
contact the sender at the above quoted email address. Any unauthorised form of
reproduction of this message is strictly prohibited. The Institute does not
guarantee the security of any information electronically transmitted and is not
liable if the information contained in this communication is not a proper and
complete record of the message as transmitted by the sender nor for any delay
in its receipt.
----------------------------------------------------------------------------------------
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
- » [SI-LIST] MICROVIA CAPACITANCE