[SI-LIST] Re: Linpar comment

In a message dated 4/23/2004 5:54:34 AM Pacific Standard Time, 
gstokes@xxxxxxxxx writes:
If Linpar produces s-parameters, and Multlin uses input as RLCG parameters,
how do you connect this with Multlin? 
**********
Geoff:
When you set up Linpar to perform an analysis, in the Configuration/Setup 
menu you can select S-parameters as an output in ADDITION to the RLGC matrices, 
which is the standard output. The output data file from Linpar is directly 
importable into Multlin.

Mike

Michael L. Conn
Owner/Principal Consultant
Mikon Consulting

*** Serving Your Needs with Technical Excellence ***


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  

Other related posts: