[SI-LIST] Re: Linpar comment

Hi Michael

If Linpar produces s-parameters, and Multlin uses input as RLCG parameters,
how do you connect this with Multlin?  (I just found Multlin at Artech,
having not previously heard of it.  However, there was no readme file.)

Best wishes
Geoff

> -----Original Message-----
> From: MikonCons@xxxxxxx [mailto:MikonCons@xxxxxxx]
> Sent: 22 April 2004 18:40
> To: si-list@xxxxxxxxxxxxx
> Subject: [SI-LIST] Linpar comment
> 
> 
> In my E-mail to the list on 4/19, item 5, I implied 
> Linpar+Multlin was 
> required to output S-parameters. As was noted by Chris Cheng, 
> Linpar alone is 
> required to output S-parameters for multiple, coupled, lossy 
> T-lines. Sorry if I 
> misled anyone. The main benefit of Multlin is to take LCRG 
> parameter matrices 
> (from ANY program that will produce them) and convert them 
> into SPICE (actually 
> PSPICE) format using Laplacian-bbased techniques. The result 
> is a well behaved, 
> bilateral, coupled network of interconnects that exhibits 
> frequency dependent 
> dielectric and skin effect losses. 
> 
> Michael L. Conn
> Owner/Principal Consultant
> Mikon Consulting
> 
> *** Serving Your Needs with Technical Excellence ***
> 
> 
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
> 
> or to administer your membership from a web page, go to:
> http://www.freelists.org/webpage/si-list
> 
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
> 
> List FAQ wiki page is located at:
>                 http://si-list.org/wiki/wiki.pl?Si-List_FAQ
> 
> List technical documents are available at:
>                 http://www.si-list.org
> 
> List archives are viewable at:     
>               http://www.freelists.org/archives/si-list
> or at our remote archives:
>               http://groups.yahoo.com/group/si-list/messages
> Old (prior to June 6, 2001) list archives are viewable at:
>               http://www.qsl.net/wb6tpu
>   
> 


_________________________________________________________

Zetex Semiconductors - Solutions for an analog world

EID Award Winners for  'Best Use of Technology' 2003 for the 
AcoustarTM ZXCW8100 End-to-End Digital Audio Amplifier Controller

http://www.zetex.com
_________________________________________________________

######################################################################
E-MAILS are susceptible to interference. You should not assume that
the contents originated from the sender or the Zetex Group or that they 
have been accurately reproduced from their original form.
Zetex accepts no responsibility for information, errors or omissions in
this e-mail nor for its use or misuse nor for any act committed or
omitted in connection with this communication.
If in doubt, please verify the authenticity with the sender.
######################################################################

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: