[SI-LIST] Re: Limiting number of nodes in HSPICE .probe output files
- From: "Ingraham, Andrew" <Andrew.Ingraham@xxxxxx>
- To: <Bill.Cohen@xxxxxxxxxxxxxxxx>
- Date: Fri, 10 May 2002 09:59:05 -0400
Bill wrote:
> I use the statement
>
> .option POST
>
> Then use
>
> .probe dc/tran/etc v(sig) i(sig)
Have you tried this?
I just did (i.e., changed from ".OPTION PROBE" to ".OPTION POST"), and
the results are even worse. Instead of 502 node voltages in the output
file, now HSPICE gives me 517!
The silence from Avanti is deafening.
Regards,
Andy
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
