[SI-LIST] Re: Labelling waveforms in XTK

Siva,

On Windows, one way is to click waveviewer window, then press CTRL-C to make
a copy of the entire waveviewer image on the clipboard and then paste
(CTRL-V) it into Word, Powerpoint, or Paint.  If you are on UNIX then you
may be able to do something similar using Star Office or just "xwd" and use
a generic painting program like "xv".  Hope that helps.  

Please contact support@xxxxxxxxxxxx or reply to me directly if this does not
resolve your problem.

Thanks!

Chris

> -----Original Message-----
> From: Siva kumar [mailto:sivakumar_skm@xxxxxxxxx] 
> Sent: Friday, May 17, 2002 5:26 AM
> To: si-list@xxxxxxxxxxxxx
> Subject: [SI-LIST] Labelling waveforms in XTK
> 
> 
> 
> Hello SIexperts,
>              Could anybody tell me how to label a
> waveform(for each signal in the wave viewer window )
> in the waveviewer, SCRATCH PAD.?
> 
> 
> Thanks and regards,
> Sivakumar.S


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: