[SI-LIST] Re: Jitter Tolerance

Ralf, you might also want to take a look at the Jitter 360 webinar 
series presented by Ransom Stephens for Tektronix.

Steve
ralf.inova@xxxxxx wrote:
> Dear Experts,
>
> I found the following Jitter Tolerance Specification for XAUI:
>
> Receiver must be able to tolerate this much jitter
> DJ : 0.37 UIp-p
> DJ+RJ : 0.55 UIp-p
> SJ : additional SJ (on top of DJ+RJ) to limit of mask…
>       -> 8.5 UI < 22.1kHz
>       -> 0.1 UI > 1.875MHz    (linear fit between these points)
>
> legend:
> DJ : Deterministic jitter (includes residual ISI, duty-cycle error, etc.)
> RJ : Random jitter – uncorrelated with any source
> SJ : Sinusoidal jitter
>
> Is there any formula or rule of thump, how much SJ the receiver must 
> tolerate, if one could reduce the DJ and RJ to neglegible values?
>
> Thanks in advance,
> Ralf
>
>   


-- 
Steve Weir
IPBLOX, LLC 
150 N. Center St. #211
Reno, NV  89501 
www.ipblox.com

(775) 299-4236 Business
(866) 675-4630 Toll-free
(707) 780-1951 Fax


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List technical documents are available at:
                http://www.si-list.net

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  

Other related posts: