[SI-LIST] Injecting Noise into a ground Plane

SI Folks,

Could someone tell me the best approach or technique to inject noise into a
ground plane?
I have a PCB with microstrip and stripline differential traces some are not
coupled and others are.
Would like to observe (if possible) how effective differential signaling is
at being immune to injected
ground plane noise. Thanks in advance.

Regards...
Ron Morneault


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: