[SI-LIST] Re: Impedance Discontinuity @ SMA connector

Suresh,

SiQual has good experience in minimizing the impedance discontinuities that 
can be caused by SMA connectors. In our most recent implementation, there 
was very little discontinuity shown on the TDR (32ps risetime). This can be 
attributed to how we implemented the SMA breakout on the PC Board, and the 
quality of the connector (Thanks Molex!)

This will be part of the subject matter we cover at the DesignCon 2002 Tech 
Forum "Attention to Details: Preparing for the Transition from 2.5 to 
10Gbps" held on Thursday January 31st.

We'll also be presenting a paper on comparing IBIS and HSPICE Simulations 
of a 2.5Gbps LVDS Buffer. Our Booth number is 730.  Come by and see us.

For DesignCon 2002 registration, go to http://www.designcon.com/2002/ .

After the show, we'll be posting papers on our website http://www.siqual.com

regards

davem
===
Dave Macemon
SiQual, A division of Stilwell Baker
davem@xxxxxxxxxx
phone (503)885-1231
fax     (503)885-0550
http://www.siqual.com/

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: