Dear All,
I have some questions about creating IBIS file for PCIExpress(analog
signal).
1. Does the IBIS model is better when DC voltage sweep of VI table is smaller??
2. If the output voltage swing of the pad is 0~3.3V, does it means the voltage
range(0V~3.3V) of the VI table is enough.
Best Regards
Tina
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu