[SI-LIST] IBIS model generation from Datasheet? How?

Hi everyone.

One of my big problem is making IBIS model from Datasheet and fixing it from 
that.

Is there anybody that make it clear?

Specially, in I/V curves often have a problem.
As I know, the I/V curves are the information of Buffer strength and 
Input/output impedance.
That means if I have only two(V and I) points, I can make I/V curve, is it 
right?
For example when Vil = 0.8V and Vih = 2.0V and Vcc = 3.3V, if I have the data
such as when Vol = -3.3V the Iol = -50mA and Vol = 6.6V the Ioh = 100mA, 
From this information, Can I make the V/I curve?


Any comment is O.K. to me.

Thank you very much.


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: