[SI-LIST] Re: IBIS creation

Madhusudhan,

Check this link, might be useful: http://www.eigroup.org/ibis/tools.htm=20

Best Regards,
Unni=20
=20
=20

-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx]
On Behalf Of Tom Dagostino
Sent: Monday, January 22, 2007 2:32 PM
To: madhusudhan@xxxxxxxxxx; 'SI-List'
Subject: [SI-LIST] Re: IBIS creation

Madhusudhan

There is a wealth of information on the IBIS home page, I would suggest
=3D you start there.  There is much too much information for this forum.

The other approach is to contract someone to do the work for you.  Yes,
=3D a shameless plug, we make IBIS models.

Tom Dagostino
Teraspeed(R) Labs
13610 SW Harness Lane
Beaverton, OR 97008
503-430-1065
tom@xxxxxxxxxxxxx=3D20
www.teraspeed.com=3D20

Teraspeed Consulting Group LLC
121 North River Drive
Narragansett, RI 02882
401-284-1827

-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx]
=3D On Behalf Of Madhusudhan Kulkarni
Sent: Monday, January 22, 2007 12:52 AM
To: tom@xxxxxxxxxxxxx; 'SI-List'
Subject: [SI-LIST] Re: IBIS creation


Dear Tom,

Vendors are not providing the ibis,so we have to create an IBIS.what are
=3D the

informations required to create an IBIS

Regards
Madhusudhan Kulkarni

----- Original Message -----=3D20
From: "Tom Dagostino" <tom@xxxxxxxxxxxxx>
To: <madhusudhan@xxxxxxxxxx>; "'SI-List'" <si-list@xxxxxxxxxxxxx>
Sent: Monday, January 22, 2007 1:55 PM
Subject: RE: [SI-LIST] IBIS creation


> Creating an IBIS model from a datasheet is the least preferred=20
> method=3D20 of making models.  There is usually not enough data in a=20
> datasheet to=3D20 get the rise and fall times, how the rising waveform =

> to power overlaps =3D

> the rising waveform to ground (similarly for the falling=20
> waveforms),=3D20 the shape and values of the IV curves, the presence =
of=20
> clamps,=3D20 especially the power clamp, the value of C_comp, etc.
>
> Either make the model from SPICE simulation or from measurements.
>
> Tom Dagostino
> Teraspeed(R) Labs
> 13610 SW Harness Lane
> Beaverton, OR 97008
> 503-430-1065
> tom@xxxxxxxxxxxxx
> www.teraspeed.com
>
> Teraspeed Consulting Group LLC
> 121 North River Drive
> Narragansett, RI 02882
> 401-284-1827
>
> -----Original Message-----
> From: si-list-bounce@xxxxxxxxxxxxx=3D20
> [mailto:si-list-bounce@xxxxxxxxxxxxx]
> On
> Behalf Of Madhusudhan Kulkarni
> Sent: Sunday, January 21, 2007 11:33 PM
> To: SI-List
> Subject: [SI-LIST] IBIS creation
>
>
> Hi,
> I am new to creation of IBIS models, I want to know How to create an=20
> IBIS model from datasheet? we require any other tools =3D

> to create an ibis?
>
> Regards
> Madhusudhan Kulkarni
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
> or to administer your membership from a web page, go to:=3D20=20
> http://www.freelists.org/webpage/si-list
>
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
>
> List technical documents are available at:
>                http://www.si-list.net
>
> List archives are viewable at:=3D20
> http://www.freelists.org/archives/si-list
> or at our remote archives:=3D20
> http://groups.yahoo.com/group/si-list/messages
> Old (prior to June 6, 2001) list archives are viewable at: =3D20=20
> http://www.qsl.net/wb6tpu
>
>
>
>=3D20


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List technical documents are available at:
                http://www.si-list.net

List archives are viewable at:    =3D20
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
 =3D20


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List technical documents are available at:
                http://www.si-list.net

List archives are viewable at:    =20
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
 =20

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List technical documents are available at:
                http://www.si-list.net

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: