[SI-LIST] Re: IBIS Ver 4.2&5

Hi again Mohamad,
As for the first part of your question (how to use the models), I posted a 
7-minute screen capture on my blog entitled "Workflow with IBIS Models" that 
gives a rough idea of how you might use IBIS Models in a simulation:

 

http://signal-integrity-tips.com/

 

Hope this helps,

-- Colin

 

 

________________________________________

From: WARWICK,COLIN (A-Americas,ex1) 

Sent: Saturday, July 26, 2008 3:28 PM

To: 'Mohamad Haghtalab'; si-list@xxxxxxxxxxxxx

Subject: RE: [SI-LIST] IBIS Ver 4.2&5

 

Hi Mohamad,

ADS supports IBIS 4.2. The relevant module is called E8949 IBIS I/O Models. The 
product page is:

 

http://eesof.tm.agilent.com/products/e8949a.html

The following PDF has a table of supported keywords:

 

http://eesof.tm.agilent.com/pdf/ibis_supported_features.pdf

 

 

-----Original Message-----

From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] On 
Behalf Of Mohamad Haghtalab

Sent: Saturday, July 26, 2008 10:09 AM

To: si-list@xxxxxxxxxxxxx

Subject: [SI-LIST] IBIS Ver 4.2&5

 

Hi all

 

I want to know how can i use IBIS Ver 4.2&5 model in my simulation,what 
softwares

support these versions of IBIS model

 

 


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List technical documents are available at:
                http://www.si-list.net

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: