[SI-LIST] Re: IBIS Newbie

Hello, Ahmad,

For a "newbie", I would personally recommend starting with the Training link
on the IBIS web site and the IBIS 2.1 Cookbook.  There was also a recent
SI-list thread discussing SI books.

For tool use, it is usually best to contact the EDA tool vendor directly.
They often have training classes on-line.

Best regards,
Lynne Green 


-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] On
Behalf Of ahmad_s03
Sent: Wednesday, February 25, 2004 10:20 PM
To: si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] IBIS Newbie 

Hello everyone,

Hope you guys are doing fine. where and how do I start signal 
integrity using IBIS in ProtelSE99. 

I'll be greatful if someone gives me a Link/Document or any sort of 
info to kick start with IBIS ...

thanks



Regards
Ahmad Saeed



------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: