Hi Gurus, Warm Wishes to all ...... I'm a beginner for SI Analysis and I need some clarification about the Error of IBIS Model(71V2546-SRAM),which I'm getting when I Import it into the Zuken's Hotstage tool Constraint Manager-Simulation Library. Actully I'm using the model ,which I downloaded from IDT website. Please look into the error message below and give your precious suggestions, ERROR- Model IOPAD2546Z: The [Rising Waveform] with [R_fixture]=50 Ohms and [V_fixture]=1.5V has TYP column DC endpoints of 0.50V and 2.21v, but an equivalent load applied to the model's I-V tables yields different voltages ( 2.13V and 2.69V), a difference of 288.80% and 84.70%, respectively. ERROR- Model IOPAD2546Z: The [Falling Waveform] with [R_fixture]=50 Ohms and [V_fixture]=1.5V has TYP column DC endpoints of 0.50V and 2.21v, but an equivalent load applied to the model's I-V tables yields different voltages ( 2.13V and 2.69V), a difference of 288.98% and 84.70%, respectively. WARNING- Model 'IOPAD2546Z': TYP VI curves cannot drive through Vmeas=1.25V given load Rref=50 Ohms to Vref=1.5V ERROR- Model IOPAD2546Z: The [Rising Waveform] with [R_fixture]=50 Ohms and [V_fixture_min]=1.5V has MIN column DC endpoints of 0.53V and 2.11v, but an equivalent load applied to the model's I-V tables yields different voltages ( 2.04V and 2.54V), a difference of 304.74% and 86.47%, respectively. ERROR- Model IOPAD2546Z: The [Falling Waveform] with [R_fixture]=50 Ohms and [V_fixture_min]=1.5V has MIN column DC endpoints of 0.53V and 2.11v, but an equivalent load applied to the model's I-V tables yields different voltages ( 2.04V and 2.54V), a difference of 304.74% and 86.47%, respectively. WARNING- Model 'IOPAD2546Z': MIN VI curves cannot drive through Vmeas=1.25V given load Rref=50 Ohms to Vref=1.5V ERROR- Model IOPAD2546Z: The [Rising Waveform] with [R_fixture]=50 Ohms and [V_fixture_max]=1.5V has MAX column DC endpoints of 0.48V and 2.32v, but an equivalent load applied to the model's I-V tables yields different voltages ( 2.22V and 2.83V), a difference of 283.59% and 82.91%, respectively. ERROR- Model IOPAD2546Z: The [Falling Waveform] with [R_fixture]=50 Ohms and [V_fixture_max]=1.5V has MAX column DC endpoints of 0.48V and 2.32v, but an equivalent load applied to the model's I-V tables yields different voltages ( 2.22V and 2.83V), a difference of 283.59% and 82.74%, respectively. WARNING- Model 'IOPAD2546Z': MAX VI curves cannot drive through Vmeas=1.25V given load Rref=50 Ohms to Vref=1.5V Errors : 6 Warnings: 6 File Failed Thanks & Regards, Suresh.K, Vth EDA Lab, C-DOT, Bangalore-52. ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http:/www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu