All, Has anyone encountered problems with EMI/noise issues on I2C wires and/or busses? We use industry standard I2C to interface with our bulk 208V/48V AC/DC power supplies. We are observing instances where control and status signals (connected via I2C) for the AC/DC power supplies appear to be intermittently in the wrong state. I believe that we are currently running the I2C clock signal at 100MHz, and our wire lengths are significant on the order of 2-3ft. Thanks, Chris Jakubiec Sun Microsystems ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu