[SI-LIST] Re: Hspice simulation for SI

Thanks for bharatkumarbhat's information.
Actually I am trying to do some SI simulation by HSpice, But don't know how to 
read PCB layout data into Hspice.
I read the Hspice manual found that there is a tool called
PADS-LPE which can do this job, anybody can tell me where to get it? Is there 
anybody doing the same job as I am 
doing? IF I can get any advice from experienced guys, it will be much helpful.

Thanks very much!
Cheart

"bharatkumarbhat" <bharatkumarbhat@xxxxxxxxxxxxxx>µÄÀ´ÐÅ̸µ½:
hi Cheart,
From the error message, one thing is sure that there has been mismatch in 
specifing the node names in the syntax of IBIS buffer( in HSPICE netlist) and 
the node of IBIS buffer connected to the voltage source.
So, if you correctly follow the syntax given in the manual,there should be no 
problem.
If u still face problem let me know.

bharath.





---------------------------------------------
»¶Ó­¹âÁÙ http://www.cmmail.com
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: