[SI-LIST] Hspice simulation for SI

Hi,
I am interested in simulating SI problems by Hspice with IBIS models. Anyone 
here ever did this before?
I read the Hspice manual and found it can read IBIS model and simulating it 
with W Element. 
My questions are:
1. Does Hspice convert IBIS model to Spice Model then simulate it? or Just use 
IBIS model directly?
2. I always get error message in simulation like: 

**error**: reordx:2:
Incorrect connection of voltage source in IOB
nd1, nd2, nvs1, nvs2 = 5 1 2 10

  What does this mean? Where can I find the file in which there are nodes like 
nd1....nvs2 ?  I never defined these
nodes in my Spice file.

Thanks very much
Cheart




---------------------------------------------
»¶Ó­¹âÁÙ http://www.cmmail.com
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: