[SI-LIST] Re: Hspice core dump

Michael,

Are you running 2000.4 or 2000.2?
We're finding lots of little issues with 2000.4 here.

scott


--
Scott McMorrow
Principal Engineer
SiQual, Signal Quality Engineering
18735 SW Boones Ferry Road
Tualatin, OR  97062-3090
(503) 885-1231
http://www.siqual.com


Michael Baxter wrote:

> Hello to everyone,
>
> I've been having a problem recently with Hspice causing
> a core dump when I run a set of encrypted models (the
> encryption may or may not be a factor). In the recent
> past I had a similar problem with another vendor's models
> but found something simple (like a node name it did not
> like) that was causing the dump.
>
> Has anyone seen a similar problem? Any suggestions on
> where to look?
>
> Thanks,
>
> - Michael
>
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~+
> | Michael Baxter           e-mail: baxter@xxxxxxxx |
> | Principal SI Engineer                            |
> | NESA, Inc.               http://www.nesa.com/    |
> | 5 LAN Drive ~ Suite 200  Tel +1.978.392-8787     |
> | Westford, MA 01886 USA   Fax +1.978.392-8686     |
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~+
>
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
> List archives are viewable at:     http://www.freelists.org/archives/si-list
> Old list archives are viewable at: http://www.qsl.net/wb6tpu
>



------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     http://www.freelists.org/archives/si-list 
Old list archives are viewable at: http://www.qsl.net/wb6tpu

Other related posts: