[SI-LIST] Re: How to short two nodes in SPICE
- From: "Lynne D. Green" <lgreen22@xxxxxxxxxxxxxx>
- To: "'millionwood'" <millionwood@xxxxxxx>, <si-list@xxxxxxxxxxxxx>
- Date: Tue, 29 Jul 2008 10:57:56 -0700
Two ways:
* Connect with a 0V voltage source - use for temporary short, remove to
"undo".
* Give the two "nodes" the same node number - use for permanent short, no
"undo".
Lynne
"IBIS training when you need it, where you need it."
Next public IBIS seminar is Oct 9-10 in Fremont, CA.
Dr. Lynne Green
Green Streak Programs
http://www.greenstreakprograms.com
425-788-0412
lgreen22@xxxxxxxxxxxxxx
-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] On
Behalf Of millionwood
Sent: Tuesday, July 29, 2008 7:39 AM
To: si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] How to short two nodes in SPICE
Hi:
Does anyone know what's the syntax for making short connection between two
nodes? Pspice does not take zero resistor.
Thanks a lot
M.W.
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http://www.si-list.net
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http://www.si-list.net
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
- References:
- [SI-LIST] How to short two nodes in SPICE
- From: millionwood
Other related posts:
- » [SI-LIST] How to short two nodes in SPICE
- » [SI-LIST] Re: How to short two nodes in SPICE
- » [SI-LIST] Re: How to short two nodes in SPICE
- » [SI-LIST] Re: How to short two nodes in SPICE
- » [SI-LIST] Re: How to short two nodes in SPICE
- » [SI-LIST] Re: How to short two nodes in SPICE
- » [SI-LIST] Re: How to short two nodes in SPICE
- [SI-LIST] How to short two nodes in SPICE
- From: millionwood