[SI-LIST] Re: How to measure the kvco using spice?
- From: "Michael Poimboeuf" <Michael_Poimboeuf@xxxxxxxxxxxxxx>
- To: <r92101@xxxxxxxxxxxxxxxxxx>, <si-list@xxxxxxxxxxxxx>
- Date: Tue, 11 May 2004 10:43:48 -0700
In SPICE I use a LAPLACE generator set to Kvco/s,
Where Kvco is VCO gain in radians per volt and s is complex frequency.
--
mkp
-----Original Message-----
From: wuby [mailto:r92101@xxxxxxxxxxxxxxxxxx]=20
Sent: Tuesday, May 11, 2004 9:52 AM
To: si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] How to measure the kvco using spice?
Dear all:
How to simulate the kvco using spice?
Is there any other tool to simulate it?
And how !?
Thank you a lot!
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
