[SI-LIST] How to get the load capacitance of input buffer by means of HSPICE model

From: Zhangkun <zhang_kun@xxxxxxxxxx>
To: si-list <si-list@xxxxxxxxxxxxx>
Date: Thu, 24 Feb 2005 10:02:29 +0800

Dear all
Now I have the HSPICE model of one input buffer. In order to simplify the 
simulation, I want to use a load capacitance to replace the buffer. How to get 
the load capacitance of input buffer? Please give me some advice.

Best Regards

Zhangkun
2005.2.24


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Follow-Ups:

[SI-LIST] Re: How to get the load capacitance of input buffer by means of HSPICE model
From: steve weir

[SI-LIST] Re: How to get the load capacitance of input buffer by means of HSPICE model
From: Scott McMorrow

[SI-LIST] Re: How to get the load capacitance of input buffer by means of HSPICE model
From: Tom Dagostino

[SI-LIST] How to get the load capacitance of input buffer by means of HSPICE model

Other related posts: