[SI-LIST] How to connect vias to power ground plane?

Hi all:

In PCB, which method to connect vias to power ground plane do you favour, 
full-connected or orthogonal-connected? I think full-connected will be better 
for less resistance and less inductance. Recently I have done some simulation 
by means of Ansoft. The result surprised me. The inductance and resistance of 
orthogonal-connected mode is less than that of full-connected mode.

If anyone are interesting of my simulation result, please inform me. I will 
send it to him. Si-list does not permit to add attachment.

Best Regards
Zhangkun
2002.12.19


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: