[SI-LIST] Re: How to attach a 5 mil trace to a 603 component pad?
- From: Scott McMorrow <scott@xxxxxxxxxxxxx>
- To: tom_cip_11551@xxxxxxxxx
- Date: Thu, 12 Oct 2006 14:48:29 -0400
Tom
Then don't worry about it. Digital Video is limited to just a bit more
than 1.5 Gbps data rate. You will not have any problems with pad
discontinuities that are significant at these speeds.
Scott
Scott McMorrow
Teraspeed Consulting Group LLC
121 North River Drive
Narragansett, RI 02882
(401) 284-1827 Business
(401) 284-1840 Fax
http://www.teraspeed.com
Teraspeed® is the registered service mark of
Teraspeed Consulting Group LLC
tom_cip_11551 wrote:
>> If the discontinuity of this scale is important in your
>>
> application (I guess
>
>> depends on the frequency you operate at) then you should consider
>>
> using
>
>> smaller parts such as 0402 or even 0201.
>>
>
>
> Of course this is true. However, I am restricted to using a 10uF
> (4.7uF at a minimum) capacitor for the video standard involved.
> Looking a current technology, a 603 is as small as I can get.
>
> Regards
> Tom
>
>
>
>
>
>
>> /Mikhail
>>
>>
>> ------------------------------------------------------------------
>> To unsubscribe from si-list:
>> si-list-request@... with 'unsubscribe' in the Subject field
>>
>> or to administer your membership from a web page, go to:
>> http://www.freelists.org/webpage/si-list
>>
>> For help:
>> si-list-request@... with 'help' in the Subject field
>>
>> List FAQ wiki page is located at:
>> http://si-list.org/wiki/wiki.pl?Si-List_FAQ
>>
>> List technical documents are available at:
>> http://www.si-list.org
>>
>> List archives are viewable at:
>> http://www.freelists.org/archives/si-list
>> or at our remote archives:
>> http://groups.yahoo.com/group/si-list/messages
>> Old (prior to June 6, 2001) list archives are viewable at:
>> http://www.qsl.net/wb6tpu
>>
>>
>
>
>
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
> or to administer your membership from a web page, go to:
> http://www.freelists.org/webpage/si-list
>
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
> List FAQ wiki page is located at:
> http://si-list.org/wiki/wiki.pl?Si-List_FAQ
>
> List technical documents are available at:
> http://www.si-list.org
>
> List archives are viewable at:
> http://www.freelists.org/archives/si-list
> or at our remote archives:
> http://groups.yahoo.com/group/si-list/messages
> Old (prior to June 6, 2001) list archives are viewable at:
> http://www.qsl.net/wb6tpu
>
>
>
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
- References:
- [SI-LIST] Re: How to attach a 5 mil trace to a 603 component pad?
- From: tom_cip_11551
Other related posts:
- » [SI-LIST] How to attach a 5 mil trace to a 603 component pad?
- » [SI-LIST] Re: How to attach a 5 mil trace to a 603 component pad?
- » [SI-LIST] Re: How to attach a 5 mil trace to a 603 component pad?
- » [SI-LIST] Re: How to attach a 5 mil trace to a 603 component pad?
- [SI-LIST] Re: How to attach a 5 mil trace to a 603 component pad?
- From: tom_cip_11551