[SI-LIST] How to attach a 5 mil trace to a 603 component pad?

Hi,

Let's say that I have a 50 Ohm odd mode trace, and that trace is 
narrow. For example it might be in the 5 to 8 mil range as far as 
width goes.

I require that this trace be AC coupled between the source and the 
load. The pads on a 603 package look like football fields compared to 
the trace. This must cause a discontinuity.

If anyone has any good reference material on structures that can be 
used to mitigate discontinuites of this type I would appreciate the 
links.

Thank You
Tom



------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: