[SI-LIST] Highspeed MultiGig-RT connector Mounting/ Soldering issue

Hi all,
I am using a MultiGig-RT Pressfit connector for a VXS Payload card.
In one of my PCB, due to manufacturing tolerance, the drill dimmension goes to 
0.56mm, whereas the recommended is 0.475+/-0.05mm.
Now the Press-fitted connector easily comes out of the PCB.
For mounting the connector with the PCB, can i solder the unused pins of 
MultiGig connector with PCB ( Board thickness is 2.38mm ).Will it affect the 
signal routed in the connector.
This MultiGig-RT connector is a Highspeed connector, which is made up of PCB 
wafers. 
Please suggest me anyother methods ( like applying glue, Soldering...)for 
mounting the connector with PCB.Please mention the procedure also.

Thanks,
Pon Ganesh


**************** CAUTION - Disclaimer *****************This email may contain 
confidential and privileged material for the
sole use of the intended recipient(s). Any review, use, retention, distribution 
or disclosure by others is strictly prohibited. If you are not the intended 
recipient (or authorized to receive for the recipient), please contact the 
sender by reply email and delete all copies of this message. Also, email is 
susceptible to data corruption, interception, tampering, unauthorized amendment 
and viruses. We only send and receive emails on the basis that we are not 
liable for any such corruption, interception, tampering, amendment or viruses 
or any consequence thereof. 
*********** End of Disclaimer ***********DataPatterns ITS Group**********


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: