[SI-LIST] High speed USB cable

What charecteristics the high speed USB cable must have to pass FCC Class B 
radiated emissions? We cannot add a ferrite core to the cable to supress the 
emissions. The device is a self powered high speed (480 MHz) USB device. From 
various testings it is established that the CM curent flowing through the D+ & 
D- conductors of the USB cable causing the failures in the radiated emission 
testing. The tests also established that the CM current flowing through the 5.0 
volts +ve & -ve conductors of the USB cable is not at all contributing for the 
emissions.
              Is it feasible to have a high speed USB bus powered device with 
1.5 m long USB cable to meet FCC / CISPR ClassB radiated emission limits 
(without a ferrite core attached to it). 
Bharath

PS : I hope this question is appropriate for this forum..


      Get the freedom to save as many mails as you wish. To know how, go to 
http://help.yahoo.com/l/in/yahoo/mail/yahoomail/tools/tools-08.html
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List technical documents are available at:
                http://www.si-list.net

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: