[SI-LIST] High Speed connector

Hello,
  I'm making a device test board. I've to bring SubLVDS signals from the =
device
  to some connector for probing. The signals are high speed in the range =
of 416MHz
  and differential voltage swing in the range of 100-140 mV.
  Please suggest me appropriate connector for this application.
  Would the touch pad strategy be good??
Regards,
Gaurav.

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: