[SI-LIST] Re: [Help] How to do termination in differential signal with series termination ?
- From: steve weir <weirsi@xxxxxxxxxx>
- To: King Da <yardala@xxxxxxxxx>
- Date: Thu, 04 Dec 2008 20:22:32 -0800
Parallel terminations absorb energy at the far end and is related only
to the channel, not the driver Z. Also, you've got your impedances
backward.
Steve.
King Da wrote:
> Hi,Folks,
> I have a differential pair which odd mode impedance is 48 Ohm and even mode
> impedance is 108 Ohm by TDR measurement.
> I would like use 100 Ohm for differential termination at far end, but how to
> choose series termination resistor for each trace at near end?
>
> I refered Bogatin's "Signal Integrity:Simplified" book that said parallel
> termination R2 equal Zeven, So, I should use 108 Ohm subtract 20 Ohm of my
> driver's Ro is 88 Ohm for my series termination at near end, am I right?
>
> The Rseries = 108 (Zeven) - 20 (Driver's Ro) = 88 Ohm, right ?
>
> Does the differential termination resistor is 100 Ohm better than 91Ohm ?
>
> Thanks,
>
> Yardala
>
>
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
> or to administer your membership from a web page, go to:
> //www.freelists.org/webpage/si-list
>
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
>
> List technical documents are available at:
> http://www.si-list.net
>
> List archives are viewable at:
> //www.freelists.org/archives/si-list
> or at our remote archives:
> http://groups.yahoo.com/group/si-list/messages
> Old (prior to June 6, 2001) list archives are viewable at:
> http://www.qsl.net/wb6tpu
>
>
>
>
--
Steve Weir
Teraspeed Consulting Group LLC
121 North River Drive
Narragansett, RI 02882
California office
(866) 675-4630 Business
(707) 780-1951 Fax
Main office
(401) 284-1827 Business
(401) 284-1840 Fax
Oregon office
(503) 430-1065 Business
(503) 430-1285 Fax
http://www.teraspeed.com
This e-mail contains proprietary and confidential intellectual property of
Teraspeed Consulting Group LLC
------------------------------------------------------------------------------------------------------
Teraspeed(R) is the registered service mark of Teraspeed Consulting Group LLC
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http://www.si-list.net
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
