[SI-LIST] Re: HSPICE error


Nancy,

Put a resistor from node 3 to ground. Like a 100meg ohm resistor.

Rdum 3 0 100meg

-----------------circuit script ------------------
.option post = 2
.ac lin 100 1e6hz 5ghz
vs 1 0 ac 1
rs 2 1 50
c1 3 2 1e-12
c2 3 0 2e-12
.print ac vm(3)
.end
---------------------------------------------------
**error**:  no dc path to ground from node    0:3

--------------------------------------------------------------
| Bill Cohen
| Toshiba America Electronic Components, Circuit Design Group




------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: