[SI-LIST] Re: HSPICE 2003.03 W-element concern
- From: Michael_Greim@xxxxxxxx
- To: esayre3@xxxxxxxx, si-list@xxxxxxxxxxxxx
- Date: Tue, 22 Apr 2003 08:24:25 -0500
Here is the feedback that I received as of yesterday.
I hope that this clears things up. This is from a
reliable source.
---------------- Cut Here ----------------------
Hspice 2003.03 is officially released and supported. Reference its release
notes for update information.
The setting "delayopt=1" you found is in beta mode and not supported yet.
Therefor it currently has no released documentation.
------------------ Cut Here too -----------------
-----Original Message-----
From: Ed Sayre III [mailto:esayre3@xxxxxxxx]
Sent: Friday, April 18, 2003 10:25 AM
To: si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] HSPICE 2003.03 W-element concern
Hello,
I was told by a very experienced college of mine, who was told by a
HSPICE rep, that the W-element in HSPICE version 2003.03 requires and
additional command to be accurate for long lossy transmission lines, (ie
backplane or cables). Specifically one needs to add "delayopt=1" to the
end of the w-element statement.
I have run a few different simulations and I do see a difference when
the delayopt is used. More importantly, it changes delay and the impedance
profile. This concerns me, especially since there is no documentation
of this "feature/bug" in any of the 2003.03 manuals.
So, does any one out there have any experience with this addition to the
w-element command.? If so what is it doing differently?
I have a couple of emails into synopsys, but have yet to get feedback.
so your comments will be greatly appreciated.
Regards
-Ed Sayre
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
NORTH EAST SYSTEMS ASSOCIATES, INC
-------------------------------------
"High Performance Engineering & Design"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Dr. Edward Sayre 3rd e-mail: esayre3@xxxxxxxx
NESA, Inc. http://www.nesa.com/
5 Lan Drive, Suite 200 Tel +1.978.392-8787 x 218
Westford, MA 01886 USA Fax +1.978.392-8686
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts: