[SI-LIST] HFSS how to acceleration

Esteemed experts,
I am hoping to simulate and extract RLGC coupling matrices (under even and odd 
mode conditions) for a stripline center conductor that has adjacent aggressor 
conductors on either side (digital interface).  Fortunately, I have Ansoft HFSS 
at my disposal for simulating this 3-line topology.  Unfortunately, I am 
finding the tool ramp to be non-trivial and I am under a time crunch which 
precludes any near term training possibility.

I would greatly appreciate any tips from HFSS experts or pointers to any web 
accessible training material that specifically addresses PCB geometry 
simulation and parasitic extraction.

Thanks in advance!

Rgds,

Dan

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: